fastshare
MSC Adams
Vypnout statistiky
KATEGORIEPOSLEDNÍ PŘÍSPĚVKYPOSLEDNÍ OZNÁMENÍSTATISTIKY UŽIVATELE
Nick: Anonymous
Příspěvků: 2209
Hodnost: Warman
Varování: 0
---
Právě je 28 bře 2024, 14:52





Všechny časy jsou v UTC + 1 hodina


Pravidla fóra


1. Dodržujte zde základní PRAVIDLA Warcenteru.
2. Při vkládání tématu se přesvědčte že neexistuje tlačítkem HLEDAT.
3. Do sekce patří grafické editory, wallpaper-makery, programy na graf. úpravu textu ap..
4. Nic nekomentujte, jakékoli nesrovnalosti hlaste moderátorům.

6. ZÁKAZ cizojazyčných popisů.
7. ZÁKAZ vkládání příspěvků bez popisu.



Odeslat nové téma Odpovědět na téma  [ Příspěvků: 5 ] 
 MSC Adams 
Autor Zpráva
Uplinker
Uplinker
Uživatelský avatar

Registrován: 18 říj 2010, 12:41
Příspěvky: 33551
Příspěvek MSC Adams

MSC Adams v2017.2 (64bit)
MAGNiTUDE Release

MSC Adams
Citace:
Adams is the most widely used multibody dynamics and motion analysis software in the world. Adams helps engineers to study the dynamics of moving parts, how loads and forces are distributed throughout mechanical systems, and to improve and optimize the performance of their products.

Traditional build and test design methods are now too expensive, too time consuming, and sometimes even impossible to do. CAD-based tools help to evaluate things like interference between parts, and basic kinematic motion, but neglect the true physics-based dynamics of complex mechanical systems. FEA is perfect for studying linear vibration and transient dynamics, but way too inefficient to analyze the large rotations and other highly nonlinear motion of full mechanical systems.

Adams multibody dynamics software enables engineers to easily create and test virtual prototypyes of mechanical systems in a fraction of the time and cost required for physical build and test. Unlike most CAD embedded tools, Adams incorporates real physics by simultaneously solving equations for kinematics, statics, quasi-statics, and dynamics. Utilizing multibody dynamics solution technology, Adams also runs nonlinear dynamics in a tiny fraction of the time required by FEA solutions. Loads and forces computed by Adams simulations improve the accuracy of FEA by providing better assessment of how they vary throughout a full range of motion and operating environments.

Archív obsahuje program + Crack / záznam pro opravu dat 3 %
Jen registrovaní uživatelé mohou vidět odkazy v code. Přihlaste se nebo zaregistrujte ZDARMA.

_________________
Nově pro dělené archívy přidávám záchranné segmenty. Pokud původní .part nelze stáhnout či je nevratně poškozen lze jej nahradt záchranným segmentem (platí pro jakýkoliv .part z daného Uploadu). 1 segment = jeden nahraditelný chybějící \ poškozený .part


02 dub 2017, 15:09
Profil
Uplinker
Uplinker
Uživatelský avatar

Registrován: 18 říj 2010, 12:41
Příspěvky: 33551
Příspěvek MSC Adams scFlow

MSC Adams scFlow v13 (64 bit)
MAGNiTUDE Release

MSC Adams scFlow
Citace:
scFLOw is developed to become the new state-of-the-art tool with the breadth of new technologies and simple practical features. The software is currently equipped with a new solver designed with higher stability and up to three times faster calculation speed than before. The new preprocessor helps entry-level users build complicated models and high-quality meshes.

Archív obsahuje program + Crack / záznam pro opravu dat 3 %
Jen registrovaní uživatelé mohou vidět odkazy v code. Přihlaste se nebo zaregistrujte ZDARMA.

_________________
Nově pro dělené archívy přidávám záchranné segmenty. Pokud původní .part nelze stáhnout či je nevratně poškozen lze jej nahradt záchranným segmentem (platí pro jakýkoliv .part z daného Uploadu). 1 segment = jeden nahraditelný chybějící \ poškozený .part


30 črc 2017, 23:08
Profil
Uplinker
Uplinker
Uživatelský avatar

Registrován: 18 říj 2010, 12:41
Příspěvky: 33551
Příspěvek MSC Adams scStream

MSC Adams scStream v13
MAGNiTUDE Release

MSC Adams scStream
Citace:
Introduced over thirty years ago, scSTREAM has serviced the electronics and architectural industries by providing high accuracy and high efficiency CFD solutions. During this time scSTREAM has mainly been characterized by its overwhelming user-friendly interfaces and imple- mentation of a structured Cartesian mesh.

A structured mesh is simple, easy to construct, and fast to solve. This mesh is comprised of many small cuboids. It is most useful for applications where tiny details and surface curvature do not have a strong effect on the overall flow field. Applications that benefit from a structured mesh include: electronics cooling, HVAC, and architecture.

Archív obsahuje program + Crack / záznam pro opravu dat 3 %
Jen registrovaní uživatelé mohou vidět odkazy v code. Přihlaste se nebo zaregistrujte ZDARMA.

_________________
Nově pro dělené archívy přidávám záchranné segmenty. Pokud původní .part nelze stáhnout či je nevratně poškozen lze jej nahradt záchranným segmentem (platí pro jakýkoliv .part z daného Uploadu). 1 segment = jeden nahraditelný chybějící \ poškozený .part


30 črc 2017, 23:54
Profil
Uplinker
Uplinker
Uživatelský avatar

Registrován: 18 říj 2010, 12:41
Příspěvky: 33551
Příspěvek MSC Adams SC Tetra

MSC Adams SC Tetra v13
MAGNiTUDE Release

MSC Adams SC Tetra
Citace:
SC/Tetra is a general purpose thermo-fluid simulation software that uses a hybrid mesh to accurately represent complex shapes and model geometry Features such as a sophisticated mesh generation system, high speed computing, low memory consumption, and a user-friendly interface throughout to increase user efficiency.

An unstructured mesh is created using tetrahedron, pentahedron, hexahedron, and/or polyhedron elements. This allows for a mesh that represents the model with high accuracy. As a result, unstructured mesh is used for applications where precise representation of the geometry is crucial. Examples of applications that benefit from an unstructured mesh include vehicle aerodynamics, flow inside duct parts, and turbomachinery.

Archív obsahuje program + Crack / záznam pro opravu dat 3 %
Jen registrovaní uživatelé mohou vidět odkazy v code. Přihlaste se nebo zaregistrujte ZDARMA.

_________________
Nově pro dělené archívy přidávám záchranné segmenty. Pokud původní .part nelze stáhnout či je nevratně poškozen lze jej nahradt záchranným segmentem (platí pro jakýkoliv .part z daného Uploadu). 1 segment = jeden nahraditelný chybějící \ poškozený .part


31 črc 2017, 10:00
Profil
Uplinker
Uplinker
Uživatelský avatar

Registrován: 18 říj 2010, 12:41
Příspěvky: 33551
Příspěvek MSC Adams Apex Grizzly

MSC Adams Apex Grizzly v2017
MAGNiTUDE Release

MSC Adams Apex Grizzly
Citace:
Structures such as large cranes, ship hulls, or shipyard ramps are typically massive assemblies often including 1000s of parts welded to- gether and present unique challenges to finite element modeling, model validation, and simulation. Due to the sheer number of parts, users need weeks to months to build finite element models (if at all possible), and often struggle to run simulation for more than a few design iterations. As a result, engineers often rely on more approximate methods to evaluate these large fabricated structures.

With its latest release, Grizzly, MSC Apex delivers a unique solution to expedite modeling and validation tasks in an integrated and generative workflow for rapidly iterating on the design to validate stiffness, strength, and stability of large assemblies.

Modeling productivity – The release introduces new geometry clean-up and de-featuring tool to eliminate manual rework and allow the user to automate model preparation tasks. A new implementation of glue and tie connections speeds-up assembly creation from hours to minutes, and allows users to create large assemblies of parts using mesh dependent connections while preserving the product structure.

Complete structural analysis – The release expends on the application structural analysis capabilities with support for multi-events buckling analysis allowing the user to manage multiple load cases. Grizzly also features new dynamics capabilities with integrated Fast Fourier Transform allowing users to enter time dependent dynamic data. Finally, results processing has been enhanced with section and connection forces processing to support load path analysis.

Integrated and Generative – Beyond modeling productivity and structural analysis completeness, with Grizzly, MSC Apex continues to build on its integrated and generative framework with brand new analysis readiness remedy tools and user experience for scenario set-up, model validation, and simulation execution which facilitated incremental validation, and rapidly iterating on design alternatives.

MSC Apex Grizzly also features a Macro record/replay capability to help users develop python scripts to automate geometry modeling, meshing and scenario set-up tasks.

Archív obsahuje program + Crack / záznam pro opravu dat 3 %
Jen registrovaní uživatelé mohou vidět odkazy v code. Přihlaste se nebo zaregistrujte ZDARMA.

_________________
Nově pro dělené archívy přidávám záchranné segmenty. Pokud původní .part nelze stáhnout či je nevratně poškozen lze jej nahradt záchranným segmentem (platí pro jakýkoliv .part z daného Uploadu). 1 segment = jeden nahraditelný chybějící \ poškozený .part


31 črc 2017, 10:41
Profil
Zobrazit příspěvky za předchozí:  Seřadit podle  
Odeslat nové téma Odpovědět na téma  [ Příspěvků: 5 ] 

Všechny časy jsou v UTC + 1 hodina


Nemůžete zakládat nová témata v tomto fóru
Nemůžete odpovídat v tomto fóru
Nemůžete upravovat své příspěvky v tomto fóru
Nemůžete mazat své příspěvky v tomto fóru
Nemůžete přikládat soubory v tomto fóru








Uložto alternativa Pizza Modena MovieDB.cz filmová databáze